 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20402 rev. A 03/02 60CPQ150 SCHOTTKY RECTIFIER 60 Amp TO-247AC Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 s sine VF TJ @ 30 Apk, TJ= 125C (per leg) range Description/Features The 60CPQ150 center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175 C TJ operation Center tap TO-247 package High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability 60CPQ150 Units 60 150 2300 0.67 A V A V - 55 to 175 C Case Styles 60CPQ150 Base Common Cathode 2 1 3 2 Anode 1 Anode 2 Common Cathode TO-247AC www.irf.com 1 60CPQ150 Bulletin PD-20402 rev. A 03/02 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 60CPQ150 150 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 (Per Leg) (Per Device) * See Fig. 7 60CPQ Units 30 60 2300 510 0.5 1 A mJ A A Conditions 50% duty cycle @ TC = 151C, rectangular wave form 5s Sine or 3s Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied TJ = 25 C, IAS = 1 Amps, L = 1 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Typ. 0.80 0.93 0.64 0.74 Max. Units 0.83 0.99 0.67 0.77 100 25 820 7.5 10000 V V V V A mA pF nH V/ s Conditions @ 30A @ 60A @ 30A @ 60A TJ = 25 C TJ = 125 C @ 25C TJ = 25 C TJ = 125 C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) * See Fig. 2 Typical Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) 10 12 - VR = 5VDC (test signal range 100kHz to 1Mhz) Measured lead to lead 5mm from package body (Rated VR) dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range to Case (Per Leg) * See Fig. 4 RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink wt Approximate Weight T Mounting Torque Case Style Min. Max. 0.25 6 (0.21) 6 (5) 12 (10) C/W Mounting surface , smooth and greased g (oz.) Kg-cm (Ibf-in) 0.4 C/W DC operation 60CPQ Units -55 to 175 -55 to 175 0.8 C C Conditions RthJC Max. Thermal Resistance Junction C/W DC operation TO-247AC(TO-3P) JEDEC 2 www.irf.com 60CPQ150 Bulletin PD-20402 rev. A 03/02 1000 1000 Tj = 175C 100 Reverse Current - IR (mA) 150C 125C 100C 10 1 0.1 0.01 0.001 75C 50C 25C Instantaneous Forward Current - I F (A) 100 Tj = 175C Tj = 125C Tj = 25C 0.0001 0 20 40 60 80 100 120 140 160 Reverse Voltage - V R (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 T = 25C 10 Junction Capacitance - CT (pF) J 1 0 0.5 1 1.5 2 2.5 Forward Voltage Drop - V FM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 100 0 20 40 60 80 100 120 140 160 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 1 Thermal Impedance Z thJC (C/W) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 P DM 0.1 t 1 t2 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x Z thJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 t1 , Rectangular Pulse Duration (Seconds) 1 10 Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 60CPQ150 Bulletin PD-20402 rev. A 03/02 180 Allowable Case temperature (C) Average Power Loss (Watts) 30 25 20 15 10 5 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS Limit 170 DC 160 150 140 80% Rated Vr applied 130 see note (2) 120 0 5 10 15 20 25 30 35 40 45 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive Surge Current - I FSM (A) Square wave (D = 0.50) DC 0 5 10 15 20 25 30 35 40 45 Average Forward Current - I F(AV) (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 10000 At Any Rated Load Condition And With rated Vrrm Applied Following Surge 1000 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L H IG H -SPE ED SW ITC H FREE-W HE EL D IO D E 40H FL40S02 V d = 25 V olt D UT IRFP460 Rg = 25 ohm + C UR RE N T M O N ITO R Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 60CPQ150 Bulletin PD-20402 rev. A 03/02 Outline Table 3. 65 (0 .14 4) 3. 55 (0 .13 9) 15 .90 (0 .626 ) 15 .30 (0 .602 ) DIA. 5. 30 (0 .20 9) 4.70 ( 0.185) 2.5 ( 0.098) 1.5 ( 0.059) 5. 70 (0 .22 5) 5.30 ( 0.208) 20 .30 (0 .800 ) 19 .70 (0 .775 ) 5.50 ( 0.217) 4. 50 (0 .17 7) 1 2 3 (2 PLCS.) Base Common Cathode 2 1 3 2 Anode Anode 2 14. 80 ( 0.583) 14 .20 (0 .559 ) 1 4. 30 (0 .17 0) 3. 70 (0 .14 5) 2. 20 (0 .08 7) Common Cathode 1. 40 (0 .05 6) 2. 40 (0 .09 5) MAX. 0.80 ( 0.032) 0. 40 (0 .21 3) MAX. 1. 00 (0 .03 9) 10. 94 ( 0.430) 10 .86 (0 .427 ) Conform to JEDEC outline TO-247AC (TO-3P) Dimensions in millimeters and (inches) Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/02 www.irf.com 5 |
Price & Availability of 60CPQ150
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |